Specification

Capacity	Steel: 10 mm (3/8″) Wood: 21 mm (13/16″) Masonry: 8 mm (5/16″)
Impacts Per Minute (IPM)	Impact-driver mode (Hard: 0-3,200 \| Medium: 0-2,400 \| Soft: 0-1,200) Hammer drill mode (Hi: 0 – 32,400 \| Lo: 0 – 8,400)
No Load Speed (RPM)	Hard: 0 – 2,700 \| Medium: 0 – 2,200 \| Soft: 0 – 1,300 Drill Mode High: 0 – 2,700 \| Low: 0 – 700 Hammer Drill Mode High: 0 – 2,700 \| Low: 0 – 700 Screwdriver Mode High: 0 – 1,100 \| Low: 0 – 300
Max Fastening Torque	Impact-driver mode : 150 N·m (1,330 in.lbs.) Drill Mode Hard: 22 N·m \| Soft: 13 N·m
Dimensions (L x W x H)	171 x 79 x 250 mm (6-3/4″ x 3-1/8″ x 9-7/8″)
Net Weight	1.5 – 1.9 kg (3.4 – 4.1 lbs.)
Standard equipment Belt ClipAvailable options RFE: 1x Rapid Charger, 2x 3.0Ah Battery Z: Without Charger, Battery & Carrying Case

*Items of standard equipment and specifications may vary by country or area. Net weight and dimensions may differ depending on the type of battery(ies) used. All pictures shown are for illustration purpose only. Continuous Usage Time/ Work Amount: Actual performance may vary based on application.

Features

Easier mode selection and higher durability of the selection mechanism
3 Stage power selection
Independent off switch for LED job light
Built-in LED light with pre-glow and afterglow functions illuminates the work area
Phosphorescent bumper glows in dark places
4 Operation Modes (Impact Driver, Hammer Drill, Drill, Screwdriver) and Teks Screw Mode selection